k8¿­·¢app¹ÙÍø

PRODUCT OVERVIEW£º

HS26P10 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include 2K*16 bit OTP-ROM on-chip.

FEATURES£º

¡ô  Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles.

¡ô  2K*16 ROM on-chip.

¡ô  Direct and indirect addressing.

¡ô  Three 8-bit timer/counter:

                TC0£ºexternal event counter/PWM0/ Buzzer output.

                TC1£ºexternal event counter/PWM1/ Buzzer output. 

                TC2£ºexternal event counter/PWM2/ Buzzer output.

¡ô   Built-in POR, BOR.

¡ô   Built-in power on reset time (PWRT) and oscillator start-up time (OSCT).

¡ô   Built-in watch-dog (WDT).

¡ô   Four oscillation modes

                Built-in IHRC 16MHz

                Built-in ILRC 32KHz.

                External high-speed crystal oscillator 4MHz~16MHz.

                External low-speed crystal oscillator 32.768KHz.

¡ô   ONE safety bit in code-register protect program not be read.

¡ô   128*8 bit SRAM

¡ô   Three sets of standard Bi-directional I/O ports.

¡ô   8 levels stack buffer

¡ô   6 interrupt sources

                4 internal interrupts£ºTC0, TC1, TC2, ADC.

                2 external interrupts£ºINT0, INT1

¡ô   ADC

                Five external ADC input

                One internal battery measurement

                Internal AD reference voltage(VDD¡¢4V¡¢3V¡¢2V).

PRODUCT OVERVIEW£º

HS26P10E product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include 2K*16 bit OTP-ROM on-chip.

FEATURES £º

¡ô   Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles.

¡ô   2K*16 ROM on-chip.

¡ô   Built in 256*8-bit EEPROM.

¡ô   Direct and indirect addressing.

¡ô   Three 8-bit timer/counter:

                TC0£ºexternal event counter/PWM0/ Buzzer output.

                TC1£ºexternal event counter/PWM1/ Buzzer output. 

                TC2£ºexternal event counter/PWM2/ Buzzer output.

¡ô    Built-in POR, BOR.

¡ô    Built-in power on reset time (PWRT) and oscillator start-up time (OSCT).

¡ô    Built-in watch-dog (WDT).

¡ô    Four oscillation modes

                Built-in IHRC 16MHz

                Built-in ILRC 32KHz.

                External high-speed crystal oscillator 4MHz~16MHz.

                External low-speed crystal oscillator 32.768KHz.

¡ô    ONE safety bit in code-register protect program not be read.

¡ô    128*8 bit SRAM

¡ô    Three sets of standard Bi-directional I/O ports.

¡ô    8 levels stack buffer

¡ô    6 interrupt sources

                4 internal interrupts£ºTC0, TC1, TC2, ADC.

                2 external interrupts£ºINT0, INT1

¡ô    ADC

                Five external ADC input

                One internal battery measurement

                Internal AD reference voltage(VDD¡¢4V¡¢3V¡¢2V).

PRODUCT OVERVIEW£º

HS23P2721 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12 bit ADC and 2K*16 bit EPROM on-chip.

FEATURES£º

¡ô  Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycle.

¡ô   2K*16 ROM on-chip

¡ô   Direct and indirect addressing

¡ô   Four 8-bit timer/counter:

                TC0£ºexternal event counter/PWM0/ Buzzer output.

                TC1£ºexternal event counter/PWM1/ Buzzer output. 

                TC2£ºexternal event counter/PWM2/ Buzzer output.

                TC3£ºexternal event counter/PWM3(PWM duty cycle configurable 1/256)

¡ô   Built-in POR, BOR.

¡ô   Built-in power on reset time (PWRT) and oscillator start-up time (OSCT).

¡ô   Built-in watch-dog (WDT).

¡ô   Two oscillation modes

                Built-in IHRC 16MHz

                Built-in ILRC 32KHz.

¡ô   ONE safety bit in code-register protect program not be read.

¡ô   96*8 bit SRAM

¡ô   Three sets of standard Bi-directional I/O ports.

¡ô   5 levels stack buffer

¡ô   7 interrupt sources

                5 internal interrupts£ºTC0, TC1, TC2, TC3, ADC.

                2 external interrupts£ºINT0, INT1

¡ô   ADC

                Five external ADC input

                One internal battery measurement

                Internal AD reference voltage£¨VDD¡¢4V¡¢3V¡¢2V£©

                Built-in adjustable oscillator (IRC 16MHz).The maximum frequency can be configured as 24MHZ, and the frequency can be adjusted by register software.

PRODUCT OVERVIEW£º

HS23P2710 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12 bit ADC and 1K*16 bit EPROM on-chip.

FEATURES£º

Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles.

1K*16 EPROM on-chip.

Direct and indirect addressing.

Four 8-bit timer/counter:

    TC0£ºPWM0/ Buzzer output.

    TC1£ºPWM1/ Buzzer output. 

    TC2£ºPWM2/ Buzzer output.

    TC3£ºPWM3(PWM duty cycle configurable 1/256).

Built-in POR, BOR.

Built-in power on reset time (PWRT) and oscillator start-up time (OSCT).

Built-in watch-dog (WDT).

Two oscillation modes

    Built-in IHRC 16MHz.

    Built-in ILRC 32KHz.

ONE safety bit in code-register protect program not be read.

96*8 bit SRAM.

Three sets of standard Bi-directional I/O ports.

5 levels stack buffer.

5 internal interrupts£ºTC0, TC1, TC2, TC3, ADC.

ADC

     Three external ADC input

     One internal battery measurement

     Internal AD reference voltage(VDD¡¢4V¡¢3V¡¢2V).

Built-in adjustable oscillator (IRC 16MHz).The maximum frequency can be configured as 24MHZ, and the frequency can be adjusted by register software.

PRODUCT OVERVIEW£º

HS23P2710E product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12-bit ADC,a 1K*16-bit EPROM and a 256Byte EEPROM.

FEATURES£º

Most of instruction are one cycle only. Except JMP/CALL instruction,They are two cycle.

1K*16 ROM on-chip.

256Byte EEPROM.

Direct and indirect addressing.

Four 8-bit timer/counter:

    TC0£ºPWM0/ Buzzer output.

    TC1£ºPWM1/ Buzze routput. 

    TC2£ºPWM2/ Buzzer output. 

    TC3£ºPWM3 (PWM duty cycle configurable 1/256).

Built-in POR,BOR.

Built-in power on reset time (PWRT£© and oscillator start-up time (OSCT).

Built-in watch-dog (WDT).

Two modes of oscillation:

n  Built-in IHRC 16MHz.

n  Built-in ILRC 32KHz.

ONE safety bit in code-register protect program not be read.

96*8 bit SRAM.

Three sets of standard Bi-directional I/O interfaces.

5 levels stack buffer.

5 interrupt sources: TC0¡¢TC1¡¢TC2¡¢TC3¡¢ADC.

ADC:

    Three external ADC input.

    One internal battery measurement.

    Internal AD reference voltage (VDD¡¢4V¡¢3V¡¢2V).

Built-in adjustable oscillator (IRC 16MHz£©.The maximum frequency can be configured as 24MHZ,and the frequency can be adjusted by register software.